Sideshow Order of the Jedi Luke Skywalker 12-Inch Figure Review
I've actually had this review completed for a few months now, but was reluctant to post it because it just didn't sit right with me. I wanted to make sure that my own excitement over a non-Hasbro 12" line of Star Wars figures wasn't coloring my opinion. Conversely, I didn't want to bash the figure just because it fell a little short of my expectations.
To give a little background, my expectations were built upon my experience collecting 1/6th military figures from Dragon, BBi, and DiD. Fifty bucks should get you a pretty good military figure with an excellently tailored uniform, great headsculpt, moving parts on the weapons, functional ammo pouches and equipment, and a great posable body. Some companies even have metal weapons and accessories, not to mention leather footwear. So coming from this point of view, I was expecting a lot from my fifty-dollar-Luke. However, if you've just collected Hasbro's 12" Star Wars figures, these figures will be a definite step-up.
Luke Skywalker (Sideshow Exclusive)
Order of the Jedi
Sculpt--4.5/5 The hand sculpts are equally great, with plenty of realistic detail. There are five different hands: a force wield left hand, a gloved right hand, a blaster damaged right hand, a saber grip left hand, and a saber grip right hand. They seem a bit on the large side, especially the force wield left hand. All five different hands are well posed and can be used in multiple ways. The saber grip right hand has an extended index finger for holding the trigger of a gun, perfect for the included blaster that comes with the Sideshow exclusive version. The open hand may look large and out of scale to you, but it is the correct size--just compare it to the gripping hands and you'll see their sizes are similar (if you think the gripping hands are out of scale, then that's a whole 'nother issue). Like the headsculpt, the lanky and skinny-looking arms of the body help make the hands look big. The hands attach to the body via small pegs in the wrist joints and are very easy to remove and attach. In fact, they may be too easy to remove, and it can be a bit annoying when you're posing the figure and the hands are starting to slip off their pegs. Outfit--3/5 The gray tunic Luke wore at the beginning of ROTJ is not too bad either, but there are slight inaccuracies that keep it from being the best it can be. The collar of the vest is too thick, and the shoulders of the vest juts out too far. In fact, the whole thing just looks too large compared to what is seen in the movie. However, the material they've used for the outfit is nice and thin, which is good because you want the thickness of the fabric to be in 1/6 scale. Luke's hooded cloak is rather simple and unfortunately isn't tailored as accurately as it could have been. It doesn't fit around the shoulders the way it does in the movie simply because it isn't tailored to fit the shoulders at all--it's just a big half-circle of fabric. The hood of the cloak is nice though, and also utilizes a wire to help keep its shape. Unfortunately, the thinness of the cloth makes it easy for the ends of the wire to poke out of the fabric, so be careful when you "sculpt" the hood. A small hook secures the cloak around Luke's neck. The plastic boots are the worst sculpted items in the set in my opinion. They're a bit too simplistic and don't give a realistic impression that these are supposed to be leather. They are also very stiff, making the ankle articulation useless. The great thing about 12-inch figures is that you can replace the boots with real leather boots if you so desire. The leather belt is a decent item. It has some metal pieces embedded in certain places, and a plastic hook for the lightsaber to hang from. There is also a little sculpted pouch attached to the back of the belt which, like the boots, are simplistic in their sculpting detail. The belt buckle is disappointingly plain and it looks exactly like what it's made of - a warped piece of plastic. There are three holes in the belt to adjust the tightness, allowing you to put the belt over the gray tunic if you so desire (Luke wears this belt over the gray tunic when he tells Leia that she is his sister). Body/Articulation--3/5 The hips also seem to be a point of frustration for many people, not in terms of their articulation, but in terms of the way they look. Much of the hip section is "hollowed out" so the legs have more room for motion. This is fine and dandy, but Luke's outfit has a tendency to go inward where the hollowed out portion of the hips are, making Luke's hip articulation much too obvious. Putting on Luke's vest hides the hips, but if you want to display Luke in just his black outfit then this might be a nagging detail. Some customizers have already begun experimenting with using foam padding to fill in the empty space, and the results are good so it might be something you may want to try yourself. Perhaps the most innovative feature of this body is the shoulder area. You can slide the arms at the shoulder area forward and back; this allows the arms to come together in front of the chest without having to bend the arms. This is very effective for lightsaber poses where Luke holds the lightsaber straight out in front of him with both hands. However, this isn't quite enough to make this a stellar 1/6th scale body. Accessories--4.5/5 Paint--4.5/5 Packaging--5/5 The third panel is a profile on Luke Skywalker's story, or more specifically, the events that occur in Return of the Jedi. This is another excellent bit of information that should be helpful for those not familiar with Luke or for those who need a refresher on what happened in ROTJ. The last panel is the main box which houses Luke, his cloak, and the included stand. Despite there being no twisty-ties, nothing will slide around and everything feels very sturdy. One last thing about the design that I have to mention is the use of magnets to keep the box closed. Most companies use velcro to keep their box panels closed which had some drawbacks. Sometimes the velcro stickers would come off, or sometimes the velcro would be so strong that you'd end up damaging the box just trying to open one of the panels. The magnets work great here and keep the box closed nicely. I guess the only drawback with magnets is that it can slide around a bit, but it's not that bad and I think the end result works really well. Now let's talk about the graphic design on the packaging. Again, Sideshow has done a great job here and has included everything I want to see on a package. There's great photos of the figure all around the box (none on the top or bottom), and each photo is different which gives you a good idea of the different looks and poses this figure is capable of. There's still shots from Return of the Jedi on the back of the box, which gives you a way to compare the figure to the movie and also gives you posing ideas. Cross-selling is also a good tactic and Sideshow shows three other 12-inch figures in the line: Kit Fisto, Anakin Skywalker, and Obi-Wan Kenobi. All of this comes together with a simple and elegant graphic design that makes good use of the Star Wars logo, the Order of the Jedi logo, and the name of the figure. Excellent stuff! Overall--4/5 So I started to look past the figure. Given the advancements in 1/6th scale action figures with companies like Dragon and DiD, how does this figure hold up? Honestly, not too well. Granted, they make primarily World War II figures and don't have to worry about licensing fees, but they still have the same set of problems: how do you make a costume in 1/6th scale look like the 1/1 scale costume, with as much functionality and detail as possible. Let me tell you, they're doing an incredible job. For example, they are starting to incorporate leather and metal as much as possible. Imagine having a Luke figure with leather boots, a metal belt buckle, a metal blaster, and a metal lightsaber hilt! Dragon and DiD are doing these things right now (though with WWII figures) and at a similar or cheaper price point to Sideshow's figures. I guess my point is that the bar has been raised for 1/6th detail, and Sideshow is below it. Don't get me wrong, Sideshow has raised the bar for 1/6th scaled Star Wars figures, but then again, that's not too hard when all you have to do is make a better figure than Hasbro. What about the Medicom Real Action Hero Luke, you ask? Well, I don't actually own that figure, so I can't make a totally accurate opinion, but if you had to choose between Sideshow and Medicom, I'd say that the Sideshow figure gives you more bang for the buck. But if price were not a concern, then I'd say that they both have their good and bad points and it's a toss-up. If I could, I'd meld the two together to create the ultimate Jedi Luke figure, but that's not possible. Wow, that was quite a tangent, but my point is this: Sideshow can do better. I want them to do better. I want to give their figures great scores, because I love a good 1/6 scaled figure and I love Star Wars and I want this line to be the best it can be. I simply feel that a year from now, the people who are proclaiming this to be the "best action figure evar" will look back and realize how much better this figure could have been. As a Star Wars fan, I like this figure a lot, but looking at this as just another action figure, it could have been much better. I still recommend getting this figure though, despite its shortcomings, I guarantee you won't regret it. --Photos and review by Garett Yoshimura Where to Buy: -If you already have a Luke and want to get him some better boots, there are a number of great online parts dealers that just sell loose 1/6th gear: Newline Miniatures makes real leather boots in 1/6th scale. Check out their German Officer's Riding Boots for a great replacement. Expect to pay around $18.00 for them (for real leather items, this is a deal!). Since the Newline Miniatures boots are usually sold out, a second option is to get some of Dragon's officer's boots. You can get some loose at Monkey Depot, a great loose parts dealer. Dragon's boots are molded plastic, but are much more flexible than Sideshows and have better detailing in my opinion. Get a pair for only $2.95! | |

























Comments
Thus I'm not interested in Sideshow figures, this is an awesome review! I understand that it was hard to score the figure.
I may be interested in Sideshow figures if the started to make droids like General Grievous, a decent super battle droid, droideka. And of course a Magnaguard.
This is just a suggestion. Maybe you could post guest reviews too? It's just a suggestion.
/Ty
Posted by: Ty | October 7, 2006 12:38 PM